Some of the metal stock from the BOM must be cut to length. The following measurements assume a standard build (no change to axis length):

  • 2 x aluminum angle @ 28.75″ | 730mm (X-axis)
  • 4 x aluminum angle @ 24″ | 610mm (Y-axis)
  • 2 x steel rod @ 9″ | 230mm (Y-axis)
  • 1 x AMCE/trapezoidal @ 9″ | 230mm (Z-axis)

Toggle History

Revised 4 years ago
Some<p>Some of the metal stock from the BOM must be cut to length. The following measurements assume a standard build (no change to axis length): <ul> <li>2 x aluminum angle @ 28.75" | 730mm (X-axis)</li> <li>4 x aluminum angle @ 24" | 610mm (Y-axis)</li> <li>2 x steel rod @ 9" | 230mm (Y-axis)</li> <li>1 x AMCE/trapezoidal @ 9" | 230mm (Z-axis)</li> </ul> </p>

Revised 4 years ago
<p>Prep<p>Some of the following:metal stock from the BOM must be cut to length. The following measurements assume a standard build (no change to axis length): <ul> <li>2 x aluminum angle @ 28.75" | 730mm (X-axis)</li> <li>4 x aluminum angle @ 24" | 610mm (Y-axis)</li> <li>2 x steel rod @ 9" | 230mm (Y-axis)</li> <li>1 x AMCE/trapezoidal @ 9" | 230mm (Z-axis)</li> </ul> <strong>*Note:</strong> These measurements will change as you alter the size and shape of the base or any of the machine's axes.</p> </p>

Revised 4 years ago
<p>Prep the following: <ul> <li>2 x aluminum angle @ TBA28.75" | 730mm (X-axis)</li> <li>2 <li>4 x aluminum angle @ TBA24" | 610mm (Y-axis)</li> <li>2 x steel rod @ 9" | 230mm (Y-axis)</li> <li>1 x AMCE/trapezoidal @ TBA9" | 230mm (Z-axis)</li> </ul> <strong>*Note:</strong> These measurements will change as you alter the size and shape of the base or any of the machine's axes.</p>

Revised 4 years ago
<p>Prep the following: <ul> <li>2 x aluminum angle @ TBA</li>TBA (X-axis)</li> <li>2 x aluminum angle @ TBA</li>TBA (Y-axis)</li> <li>1 x AMCE/trapezoidal @ TBA</li>TBA (Z-axis)</li> </ul> <strong>*Note:</strong> These measurements will change as you alter the size and shape of the base or any of the machine's axes.</p>

Revised 4 years ago
<p>Prep the following: <ol><ul> <li>2 x aluminum angle @ TBA</li> <li>2 x aluminum angle @ TBA</li> <li>1 x AMCE/trapezoidal @ TBA</li> </ol></ul> <strong>*Note:</strong> These measurements will change as you alter the size and shape of the base or any of the machine's axes.</p>

Revised 4 years ago
Prep<p>Prep the following: <ol> <li>2 x aluminum angle @ TBA</li> <li>2 x aluminum angle @ TBA</li> <li>1 x AMCE/trapezoidal @ TBA</li> </ol> <p><strong>*Note:</strong><strong>*Note:</strong> These measurements will change as you alter the size and shape of the base or any of the machine's axes.</p>

Revised 4 years ago
<p>PrepPrep the following:</p>following: <ol> <li>2 x aluminum angle @ TBA</li> <li>2 x aluminum angle @ TBA</li> <li>1 x AMCE/trapezoidal @ TBA</li> </ol> <p><strong>*Note:</strong> These measurements will change as you alter the size and shape of the base or any of the machine's axes.</p>

Revised 4 years ago
<p>Prep the following:</p> <ol> <li>2 x aluminum angle @ TBA</li> <li>2 x aluminum angle @ TBA</li> <li>1 x AMCE/trapezoidal @ TBA</li> </ol> <p>*Note:<p><strong>*Note:</strong> These measurements will change as you alter the size and shape of the base or any of the machine's axes.</p>

Revised 4 years ago
<p>Prep the following:</p> <ol> <li>2 x aluminum angle @ TBA</li> <li>2 x aluminum angle @ TBA</li> <li>1 x AMCE/trapezoidal @ TBA</li> </ol> <p>*Note: These measurements will change as you alter the size and

Leave a Reply

You must be logged in to post a comment.