Revised 9 months ago
<ol> <li>Footprint: (H)18" x (W)32" x (D)26" | 456mm x 809mm x 654mm</li> <li>Working area: (X)12" x (Y)13" x (Z)4" | 310mm x 340mm x 110mm</li> <li>Table travel (cutting): depends on spindle, bit, and material to be cut</li> <li>Tool: 1/4" | 6.23mm collet whip-Dremel</li> <li>Can cut: wood, plastic, foam, light metals and more</li> </ol> <p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p>

Revised 9 months ago
<ol> <li>Footprint: (H)18" x (W)32" x (D)26" | 456mm x 809mm x 654mm</li> <li>Working area: (X)12" x (Y)13" x (Z)4" | 310mm x 340mm x 110mm</li> <li>Table travel (not cutting): TBA IPM</li> <li>Table travel (cutting): depends on spindle, bit, and material to be cut</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam, light metals and more</li> </ol> <p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p>

Revised 9 months ago
<ol> <li>Footprint: (H)TBA" / (W)TBA" / (D)TBA"</li>(H)18" x (W)32" x (D)26" | 456mm x 809mm x 654mm</li> <li>Working area: (X)12" / (Y)16" / (Z)TBA"</li>x (Y)13" x (Z)4" | 310mm x 340mm x 110mm</li> <li>Table travel (not cutting): TBA IPM</li> <li>Table travel (cutting): depends on spindle, bit, and material to be cut</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam, light metals and more</li> </ol> <p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p>

Revised 9 months ago
<p>Here are the specs of a "stock" DIYLILCNCv2: <ol> <li>Footprint: (H)TBA" / (W)TBA" / (D)TBA"</li> <li>Working area: (X)12" / (Y)16" / (Z)TBA"</li> <li>Table travel (not cutting): TBA IPM</li> <li>Table travel (cutting): depends on spindle, bit, and material to be cut</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam, light metals and more</li> </ol> <p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p>

Revised 9 months ago
<p>Here are the specs of a "stock" DIYLILCNCv2: <ol> <li>Footprint: (H)TBA" / (W)TBA" / (D)TBA"</li> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li>(Z)TBA"</li> <li>Table travel (not cutting): TBA IPM</li> <li>Table travel (cutting): depends on spindle, bit, and material to be cut</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam, light metals and more</li> </ol> <p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p>

Revised 9 months ago
<p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs<p>Here are flexible, and may change depending on how you construct your specific build.</p>the specs of a "stock" DIYLILCNCv2: <ol> <li>Footprint: (H)TBA" / (W)TBA" / (D)TBA"</li> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed:<li>Table travel (not cutting): TBA IPM</li> <li>Table travel (cutting): depends on spindle, bit, and material to be cut</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam andfoam, light metals</li>metals and more</li> </ol> <p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p>

Revised 9 months ago
<p><strong>DIYLILCNC v2</strong> is <del datetime="2012-07-20T21:48:59+00:00">designed</del>designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol>

Revised 9 months ago
<b>DIYLILCNC v2</b> <p>is designed<p><strong>DIYLILCNC v2</strong> is <del datetime="2012-07-20T21:48:59+00:00">designed</del> to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol>

Revised 9 months ago
<p><b>DIYLILCNC<b>DIYLILCNC v2</b> is<p>is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol>

Revised 9 months ago
<p><strong>DIYLILCNC v2</strong><p><b>DIYLILCNC v2</b> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol>

Revised 9 months ago
<p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <p><a id="exampleslidebox" class="slidebox-link" href="#"><br /> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand"<br /> </a></p> <div id="exampleslidebox-box" class="slidebox">This is the div that is now collapsible.<br /> Note that the id of the slidebox must be the id of the slidebox-link with -box added.</div>

Revised 9 months ago
<p>DIYLILCNC v2<p><strong>DIYLILCNC v2</strong> is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <p><a id="exampleslidebox" class="slidebox-link" href="#"><br /> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand"<br /> </a></p> <div id="exampleslidebox-box" class="slidebox">This is the div that is now collapsible.<br /> Note that the id of the slidebox must be the id of the slidebox-link with -box added.</div>

Revised 9 months ago
<p>DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <p><a id="exampleslidebox" class="slidebox-link" href="#"><br /> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand"<br /> </a></p> <div id="exampleslidebox-box" class="slidebox">This is the div that is now collapsible.<br /> Note that the id of the slidebox must be the id of the slidebox-link with -box added.</div>

Revised 9 months ago
<p>DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <br><br><br><br><br><br> <p><a id="exampleslidebox" class="slidebox-link" href="#"><br /> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand"<br /> </a></p> <div id="exampleslidebox-box" class="slidebox">This is the div that is now collapsible.<br /> Note that the id of the slidebox must be the id of the slidebox-link with -box added.</div>

Revised 9 months ago
DIYLILCNC<p>DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.build.</p> <ol> <li>Working<li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max<li>Max speed: TBA IPM</li> <li>Tool:<li>Tool: 1/4" collet whip-Dremel</li> <li>Can<li>Can cut: wood, plastic, foam and light metals</li> </ol> <a<br><br><br><br><br><br> <p><a id="exampleslidebox" class="slidebox-link" href="#">href="#"><br /> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> "Expand"<br /> </a></p> <div id="exampleslidebox-box" class="slidebox"> Thisclass="slidebox">This is the div that is now collapsible.collapsible.<br /> Note that the id of the slidebox must be the id of the slidebox-link with -box added. </div>added.</div>

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> &lt;div<div id="exampleslidebox-box" class="slidebox"&gt;class="slidebox"> This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added. &lt;/div&gt;</div>

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> &gt;div&lt;div id="exampleslidebox-box" class="slidebox"&lt;class="slidebox"&gt; This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added. &gt;/div&lt;&lt;/div&gt;

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> <div &gt;div id="exampleslidebox-box" class="slidebox">Thisclass="slidebox"&lt; This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added.</div>added. &gt;/div&lt;

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> <div class="slidebox" id="exampleslidebox-box"> Thisid="exampleslidebox-box" class="slidebox">This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added. </div>added.</div>

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> [divup]This<div class="slidebox" id="exampleslidebox-box"> This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added. </div>

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> [divup id='exampleslidebox-box' class='slidebox']This[divup]This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added.

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> [divup id="exampleslidebox-box" class="slidebox"]Thisid='exampleslidebox-box' class='slidebox']This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added.

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> [divup id="exampleslidebox-box" class="slidebox"]This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added.[end-div]added.

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> [div[divup id="exampleslidebox-box" class="slidebox"]This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added.[end-div]

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> <div[div id="exampleslidebox-box" class="slidebox">Thisclass="slidebox"]This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added.</div>added.[end-div]

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> [div]This<div id="exampleslidebox-box" class="slidebox">This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added.[end-div]added.</div>

Revised 9 months ago
DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> [div id="exampleslidebox-box" class="slidebox"]This[div]This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added.[end-div]

Revised 9 months ago
<p>DIYLILCNCDIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> build. <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a class="slidebox-link" id="exampleslidebox" class="slidebox-link" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> <div class="slidebox" id="exampleslidebox-box"> This[div id="exampleslidebox-box" class="slidebox"]This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added. </div>added.[end-div]

Revised 9 months ago
<p>DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol> <a class="slidebox-link" id="exampleslidebox" href="#"> This link toggles the visibility of the div. Note that the text inside a slidebox-link will always be replaced by "Expand" </a> <div class="slidebox" id="exampleslidebox-box"> This is the div that is now collapsible. Note that the id of the slidebox must be the id of the slidebox-link with -box added. </div>

Revised 10 months ago
<p>DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challeng.</li>challenging.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> <li>Can cut: wood, plastic, foam and light metals</li> </ol>

Revised 10 months ago
<p>DIYLILCNC v2 is designed to be as user-hackable as possible. All specs are flexible, and may change depending on how you construct your specific build.</p> <ol> <li>Working area: (X)12" / (Y)16" / (Z)TBA". All three can be user-redefined, though Z will be the most challeng.</li> <li>Max speed: TBA IPM</li> <li>Tool: 1/4" collet whip-Dremel</li> </ol>