I am building my machine from .25" PVC. I had the machine and the controller box laser cut. Posting pics here:
http://astromechbuilder.com/mechloader/v/R7Dude/CNC_001/
Andy
DIYLILCNC
vers. 2.0 - the bigShoulders
-
Posted 3 years ago #
-
Great! Mind if we use some of your pictures?
Posted 3 years ago # -
Feel free, I will be posting more pics of the actual machine tonight.
Posted 3 years ago # -
So i was able to get my CNC machine running by visiting the local CNC users group. they helped me through EMC2 as it is a bit of a pain to initially set up. A tutorial on how to get your DIYLILCNC machine set up though EMC2 would be a nice thing to have since we are all working under the same mechanical specs.
Now I need to know what kind of bit everyone is using in their Dremal?
Posted 2 years ago # -
@amigaman, I'm wondering if there's something wrong with the instructions--you're the second person this week to mention the EMC section being confusing.
We tried as much as possible to link to EMC's existing instructions (which are great, btw) so that when they run updates we won't have to worry about changing our documentation. But maybe it needs to be spelled out more clearly in our pdf?
Any more specific advice for us as we work on instructions for v1.0.3? Are there particular steps that you found to be missing/confusing?
Posted 2 years ago # -
Yes,
AS your setting up EMC2 your asked a lot of questions about speed and travel rate ect. Since we all have the same hardware we should all have the same answers for these questions. If a tutorial on what the appropriate answers are to facilitate setting up the software would be a big help.
Posted 2 years ago # -
In our experience, all you need to do is run the EMC stepconf wizard, check your latency, and accept all of the default commands (at least initially). You can also cross-check the step/direction pins against HobbyCNC's setup. This should at least give you jog movement, which you can then refine with experimentation. Beyond that, sit tight and we'll have another look at making this part of our instructions more clear.
Posted 2 years ago # -
So I now have everything working (thanks to some help from the local CNC user group who were impressed withthe DIYLILCNC machine)!! But am confused as to what bits people are using. Any hints on the proper bit and where to get it.
Posted 2 years ago # -
@amigaman, congrats! Please post some pictures of the working machine when you get a chance.
Posted 2 years ago # -
Ever finish?
Posted 2 years ago # -
I'm researching making the bed for a PVC build I will be making. I see that when using MDF you guys use wood glue. What if I were to make the bed from PVC. What would one use for adhearing added spans? PVC glue? I feel like that would just fall apart over time.
Posted 2 years ago # -
PVC glue is going to weld (think melt) the pieces together into one very strong piece. You can use the same stuff that plumbers use for the pipes in your home.
Posted 2 years ago # -
I was able to cut my first part last week on the PVC DIYLILCNC machine. I used some of the sample files that came withthe software. next step is to learn how to convert Autocad files into CAM.
Posted 2 years ago #
Reply »
You must log in to post.
