Sounds like you've got a center tapped transformer. I suggest that you hook it up and test its outputs with a multimeter, then label them for future reference. You're working with wall voltage here, so if you haven't done this before you should work with a teacher or experienced hacker your first time out.
DIYLILCNC
vers. 2.0 - the bigShoulders
-
Posted 11 months ago #
-
gera222, I would also recommend getting on the HobbyCNC's Yahoo Groups page (they should have sent you info when you purchased from them). They have some files and directions for building the board, one of which will be useful to you called CNC POWER CIRCUIT. It gives you a diagram of how to wire the board. I am traveling right now but will try to get you a photo of the transformer wiring when I get home.
Posted 11 months ago # -
Ok I found the file.
Thanks.So I will put the 2 red wires together and the 2 black wires together.
Then I will connect the black to the smaller prong which is "hot" and colored black.
I will connect red to the larger neutral prong which is white in color.What program did you use to put your CAD files together? I want to use it because AutoCAD just does not work for me because of how you put them together. I saved it from autoCAD as a dxf file then opened it in PyCam.
I can't even generate G-Code for the electronics enclosure properly. And upon toolpath generation get an error. Followed the youtube tutorial where you show all the software put together and use it, it did not help.Is it possible to define which side of the line to cut on? For example for a circle I would start from the center so I would cut "inside" of the line, but for a panel, I would cut "outside" of the line.
I really want to know how to do this.Posted 11 months ago # -
I've got 2 posts before Taylor's post with unanswered questions.
I can try to put it all in one and simplify things. Just trying to keep this thread active.Posted 11 months ago # -
So I traced the electronics enclosure parts in AutoCAD and now it sort of works.
How do I upload the file here?
Also the electronics enclosure front looks slightly different in the drawing than in this picture:
http://diylilcnc.org/wp-content/uploads/2009/11/DIYLILCNC.jpgWhy is it like that? Will it still work?
Posted 11 months ago # -
@gera229, the case in the picture is a slightly earlier version of what's in the plans for V1.0.2.
You can send files to share as attachments to info at diylilcnc dot org. Thanks!
Posted 11 months ago # -
Can you be more specific about attachments?
Do I search that in the url or do I send my attachments to that as an email?I have a 2D version and a 3D version of the electronics enclosure drawing.
Posted 11 months ago #
Reply
You must log in to post.
